Materials:
* Wrench set
* Flat head screwdriver
Safety:
* Before starting work, disconnect the battery and let the car cool down.
* Work in a well-ventilated area as coolant is toxic.
Steps:
1. Locate the automatic transmission cooling pipe: It is usually connected to the radiator and transmission.
2. Disconnect the upper hose: Using a wrench, loosen the bolt at the end of the upper hose connecting the radiator and coolant pipe. Remove the hose.
3. Disconnect the lower hose: Similar to step 2, loosen the bolt on the lower hose connecting the coolant pipe to the transmission. Remove the hose.
4. Disconnect electrical connectors: If there are any electrical connectors connected to the cooling pipe, carefully disconnect them.
5. Remove the mounting bolts: Using a wrench, remove the bolts securing the coolant pipe to the radiator or transmission.
6. Remove the coolant tube: Gently pull the coolant tube to disconnect it from the radiator and transmission.
Adviсe:
* Before disconnecting the hoses, drain the coolant from the system.
* Disconnect the hoses carefully to avoid damaging them or the cooling pipe.
*Use a new O-ring when replacing the cooling tube.
* Tighten the mounting bolts according to the torque specified in the instruction manual.