Required materials:
* Automatic transmission cooler
*Transmission tubes
* Clamps
* Wrench
* Screwdriver
* Gloves
* Transmission fluid
Steps:
1. Prepare the car
* Raise the car using a jack and place it on stands.
* Gather all necessary materials.
* Wear gloves to protect your hands.
2. Remove old tubes
*Locate existing transmission lines connected to the transmission.
* Loosen the clamps holding the tubes in place.
* Remove the pipes from the automatic transmission and gearbox.
3. Install the automatic transmission cooler
* Select a suitable location to install the automatic transmission cooler.
* Attach the cooler to the car frame using the included brackets or screws.
4. Install new tubes
* Take new transmission pipes and lay them from the automatic transmission to the coolers and back.
* Make sure the tubes are not bent or kinked.
* Install a new cooler between the pipes.
5. Secure the tubes
* Secure new pipes to the automatic transmission, gearbox and cooler using clamps.
* Tighten the clamps using a wrench or screwdriver.
6. Fill with transmission fluid
* Open the hood and locate the fluid level dipstick.
* Fill with transmission fluid according to the manufacturer’s instructions.
7. Check for leaks
* Start the engine and let it idle.
* Check for leaks at pipe connections and cooler.
* If necessary, tighten clamps or replace seals.
8. Assemble the car
* Lower the vehicle to the ground and remove the stands.
* Remove all tools and materials.
* Check the fluid level in the automatic transmission and add if necessary.
Adviсe:
*Use high quality components and follow the manufacturer’s instructions.
*Before installing the cooler, rinse it thoroughly to remove any contamination.
* Check the fluid level and condition of the cooling system regularly.
*Consult a professional mechanic if you have any difficulties or concerns.