Materials:
* Washing machine
* Socket with grounding
* Wire with plug and ground
* Phillips screwdriver
* Side cutters
* Electrical tape
Instructions:
1. Turn off the power: Before starting any work, make sure that the power supply to the washing machine is turned off.
2. Connect the wire to the washing machine: Remove the back panel of the washing machine and connect the wire and plug to the motor terminals according to the following diagram:
* Brown wire – to terminal L (line)
* Blue wire – to terminal N (neutral)
*Green/yellow wire (ground) – to the ground terminal (usually indicated by a ground symbol)
3. Reinstall the back panel: Reinstall the back panel onto the washing machine, making sure all wires are securely connected.
4. Connect the plug to the outlet: Connect the plug to a grounded outlet. Make sure the outlet meets the amperage and voltage requirements marked on the washer.
5. Turn on the power: Turn on the power to the washing machine. The car should start without problems.
Additional tips:
* Use a wire with a cross-section that matches the needs of the washing machine. Typically 6 or 8 AWG wire is required.
* Make sure the outlet is properly grounded.
*If you are unsure of your abilities, contact a licensed electrician.
*Do not use extension cords or adapters. Connect the washing machine directly to a grounded outlet.
* Check electrical connections regularly to ensure they are in good condition and securely tightened.