Gear shift lever, automatic transmission Ford Focus 2
The Ford Focus 2 automatic transmission shift lever is a component that allows the driver to select the transmission position. It is located on the center console of the car and is connected to the gearbox using a cable or cable.
Design and functions
The Ford Focus 2 automatic transmission shift lever consists of the following main components:
*Lever tip: This is the visible part of the gear lever that the driver grips in his hand.
* Lever Stem: This is the metal rod that connects the tip of the lever to the selector mechanism.
* Selector Mechanism: This is the mechanism that activates the various positions of the transmission by moving the lever stem.
* Lever Lock: This is a device that prevents accidental movement of the gear lever in certain situations, such as when the engine is not running.
* Gear Position Indicator: This is a display that shows the selected transmission position on the instrument panel.
Shift Lever Positions
The Ford Focus 2 automatic transmission shift lever has the following basic provisions:
*P (Park): Locks the transmission output shafts to hold the vehicle in place.
* R (Reverse): Activates reverse gear.
* N (Neutral): Disconnects the transmission from the engine, allowing the vehicle to roll freely.
* D (Drive): Enables automatic forward shifting.
*S (Sport): Changes shift points for a sportier ride.
* L (Low): Keeps the transmission in a low gear for more traction.
Replacing the gear shift lever
Replacing the gear shift lever of a Ford Focus 2 automatic transmission may be necessary if it breaks or wears out. To replace the gear shift lever, perform the following steps:
* Disconnect the vehicle battery.
* Remove the plastic trim from the center console.
* Disconnect the cables or cables from the gear shift lever.
* Remove the bolts securing the gear shift lever to the selector mechanism.
* Install the new shift lever and tighten the bolts.
* Connect the cables or cables to the new shift lever.
* Reinstall the plastic trim on the center console.
* Connect the battery and check the operation of the gear shift lever.
When replacing the shift lever, it is recommended that you contact a qualified mechanic to ensure proper installation and operation.