Original numbers:
* 91306-TVA-A01
* 91306-PJH-003
Compatible Manufacturers:
*HONDA
*ACURA
* AISIN
* TRANSTAR
* Dorman
*ATP
Dimensions and parameters:
*Inner diameter (mm): 10.6
*Outer Diameter (mm): 12.7
* Thickness (mm): 1.6
Application:
* Honda CR-V 2002-2006
*Honda Accord 1998-2007
*Honda Odyssey 1999-2004
* Acura CL 2001-2003
* Acura TL 1999-2003
Function:
The automatic transmission solenoid gasket seals the connection between the solenoid and the transmission housing, preventing transmission fluid from leaking. It is made of rubber or plastic and can wear out or become damaged over time, leading to leaks and transmission problems.
Symptoms of malfunction:
* Transmission fluid leaks
* Difficulty shifting gears
* Noise or vibration when shifting gears
* Reduced transmission fluid level
Replacement:
Replacing the automatic transmission solenoid gasket is a relatively simple task that you can do yourself if you have the necessary tools and experience. Here are the steps to replace the automatic transmission solenoid gasket on a Honda CR-V 3:
1. Disconnect the battery and remove the air filter housing.
2. Remove the oil pan and oil pan gasket.
3. Clean the surface of the transmission housing where the solenoid is located.
4. Remove the old solenoid and remove the old gasket.
5. Clean the solenoid surface and apply a new gasket.
6. Reinstall the solenoid and tighten the bolts.
7. Install a new pan gasket and tighten the pan bolts.
8. Connect the battery and start the engine.
9. Check for leaks and transmission fluid level.
Adviсe:
*Use new gasket and bolts when replacing.
* Clean all surfaces before installing new parts.
* Tighten the bolts to the specified torque.
*If you are unsure, take it to a mechanic for a replacement.