Tools and materials for replacing the differential in a Ford Focus 2 automatic transmission:
* Tool set
* Sealant for automatic transmission pan
* New automatic transmission pan gasket
* New automatic transmission differential
* Automatic transmission oil
Instructions for replacing the differential in a Ford Focus 2 automatic transmission:
1. Preparation:
* Place the vehicle on a level surface and lock the parking brake.
* Disconnect the negative terminal of the battery.
* Drain the oil from the gearbox.
2. Removing the automatic transmission pan:
* Clean the automatic transmission pan mounting bolts.
* Unscrew the bolts securing the pallet and carefully remove it.
3. Removing the differential:
* Unscrew the bolts securing the differential to the gearbox housing.
* Carefully remove the differential from the transmission housing.
4. Installing a new differential:
* Apply sealant to the new automatic transmission pan gasket.
* Install the new differential into the transmission housing.
* Tighten the differential mounting bolts.
5. Installing the automatic transmission pan:
* Install the new automatic transmission pan gasket in place.
* Reinstall the automatic transmission pan and tighten the fastening bolts.
6. Filling oil:
* Fill the gearbox with new oil.
* Check the oil level using a dipstick.
7. Completion:
* Connect the negative terminal of the battery.
* Start the engine and let it idle for a few minutes.
* Check the gearbox oil level and add if necessary.
Adviсe:
* When tightening the differential mounting bolts, follow the specified torque.
* Clean all surfaces before assembly.
* Use high quality automatic transmission pan sealant.
* Replace the transmission filter when changing the oil.