Materials and tools:
* Electrical wiring
* Electrical tape
* Connection terminals
* Soldering iron (optional)
* Stranded wire
* Wire
* Keys, screwdrivers
Operating procedure:
1. Assessment and planning
* Determine the required wiring diagram and component locations.
*Draw the wiring diagram on paper or use software.
* Determine the location of the wires and the location of the connections.
2. Wiring
* Install new electrical wiring according to the planned layout.
* Secure the wires using zip ties or hooks.
* Avoid sharp corners and tension on wires.
3. Wire connection
* Connect the wires using splice or solder terminals.
*Use stranded wire to ensure flexibility.
* Insulate all connections with heat shrink tubing or electrical tape.
4. Installation of components
* Install the battery, alternator, starter and other electrical components.
* Connect the components to the wiring according to the diagram.
* Make sure all connections are secure.
5. Troubleshooting
* Check the wiring with a multimeter to ensure there are no breaks or shorts.
* Check all connections for looseness or damage.
*If any problems occur, please solve them according to the wiring diagram.
6. Final check
* Start the car and check the operation of all electrical components.
* Make sure headlights, turn signals, windshield wipers and other functions are working properly.
Adviсe:
* Use quality materials and tools.
* Observe proper safety precautions when working with electricity.
*If you do not have electrical experience, seek professional help.
*Keep the wiring diagram for future reference.