Materials:
* Cables
* Terminals
* Fuses
* Relay
* Lamps/LEDs
*Insulating tape/heat shrink tubing
Tools:
* Screwdriver set
* Wrench set
* Stripping pliers
* Crimping pliers
* Tester
* Multimeter
Procedure:
1. Disconnect the battery
Before starting work, disconnect the negative cable from the battery to prevent electric shock.
2. Determine the wiring diagram
Use your vehicle’s owner’s manual or wiring diagram to determine the location of wires, terminals, and fuses.
3. Connect cables
* Connect the cables to the terminals according to the wiring diagram.
*Use appropriate terminals and crimping pliers to make a secure connection.
* Insulate all connections with electrical tape or heat shrink tubing.
4. Install fuses
* Install the fuses in the appropriate slots in the fuse block.
* Select the correct rated fuses according to the wiring diagram.
5. Install a relay (if necessary)
*If the installation requires a relay, install it according to the wiring diagram.
* Make sure the relay is correctly oriented and securely fastened.
6. Connect lamps/LEDs
* Install lamps or LEDs in the indicated sockets.
* Make sure they are positioned correctly and securely fastened.
7. Check installation
* Reconnect the battery.
* Test the new installation by turning on the appropriate switches.
* Make sure all components are working properly and there are no short circuits or other problems.
8. Cleaning
*Remove any excess wires or materials.
* Secure all cable harnesses in a secure position.
* Wipe down the car to remove work marks.
Adviсe:
*Use cables of the appropriate size for the current load.
* Always tighten connections securely.
* Insulate all exposed wires to prevent short circuits.
* Check the operation of the installation after it is completed.
*If you are unsure of your electrical ability, consult a professional mechanic.