Drive seal Nissan X-Trail T31 automatic transmission

Catalog number:

* 38604-8P630

Applicability:

* Nissan X-Trail T31 (2007-2014) automatic transmission

Description:

The automatic transmission drive oil seal is designed to prevent transmission fluid from leaking from the gearbox. It is installed on the drive shaft, which connects the gearbox to the wheels.

Signs of malfunction:

*Transmission fluid leak
* Noise or vibration while driving

Causes of malfunction:

* Oil seal wear due to friction
* Damage to the oil seal during installation or removal
* Increased pressure in the gearbox

Replacement:

Replacing an automatic transmission drive oil seal requires special knowledge and tools. It is recommended that you contact a professional auto mechanic to replace it.

Materials and tools:

* New automatic transmission drive oil seal
* Transmission fluid
* Clean rags
* Tool set

Replacement procedure:

1. Raise the car on a jack and place it on supports.
2. Disconnect the drive from the gearbox.
3. Remove the old oil seal from the drive shaft.
4. Install a new oil seal on the shaft.
5. Reinstall the drive and tighten the mounting bolts.
6. Add transmission fluid to the gearbox.
7. Lower the vehicle and check the transmission fluid level and leaks.

Leave a Reply