Tools and materials:
* Wrench set
* Screwdrivers
* Pliers
* Retaining ring remover
* Drain pan for transmission fluid
* Automatic transmission filter
* Transmission fluid
* Rags
Security measures:
* Work in a well-ventilated area.
*Transmission fluid may be hot, so wear gloves.
* Remove the negative terminal of the battery.
* Raise the vehicle to a safe height.
Step-by-step disassembly instructions:
1. Draining transmission fluid:
* Locate the drain plug in the automatic transmission pan.
* Place a tray under the drain plug.
* Loosen the drain plug and drain the liquid into the pan.
2. Removing the automatic transmission pan:
* Remove the bolts holding the automatic transmission pan.
* Carefully remove the pan, being careful not to damage the gasket.
3. Replacing the automatic transmission filter:
* Find the automatic transmission filter in the pan.
*Remove the old filter and replace it with a new one.
* Reinstall the pan and tighten the bolts.
4. Removing the torque converter:
* Remove the bolts holding the torque converter.
* Carefully remove the torque converter from the transmission shaft.
5. Removing the automatic transmission front cover:
* Disconnect the bolts holding the front automatic transmission cover.
* Carefully remove the cover and be careful not to damage the gasket.
6. Removing the planetary mechanism:
* Remove the retaining rings from the planetary gear.
* Remove the planetary gear.
7. Removing pistons and clutches:
* Remove the drums with pistons.
* Remove the pistons and clutches.
8. Automatic transmission assembly:
*The assembly process is performed in reverse order.
* Install new pistons, clutches, planetary gear, torque converter and front cover.
* Install the automatic transmission pan and tighten the bolts.
* Fill the transmission fluid to the level.
9. Check and adjustment:
* Install the negative terminal of the battery.
* Start the engine and do a test drive.
* Check the transmission fluid level and add if necessary.
*Adjust the shift cable if necessary.