Basics
* The automatic transmission is designed for automatic gear shifting.
* There are several operating modes of the automatic transmission, such as park (P), reverse (R), neutral (N) and drive (D).
Usage
Starting the engine:
*Press the brake pedal.
* Move the gear selector to Park (P).
* Insert the ignition key and start the engine.
Gear shift:
* To shift into Drive (D), release the brake pedal and press the gas pedal.
* To shift into reverse (R), stop the vehicle, press the reverse button (on the gear selector or steering wheel) and press the brake pedal. Then move the gear shift lever to the R position.
Parking:
* Stop the car and apply the parking brake.
* Move the gear selector to Park (P).
* Remove the ignition key.
Neutral:
*Neutral is for towing, idling, or manually moving the vehicle (by pushing or towing).
* Move the gear selector to the neutral (N) position.
Other modes:
*Manual Mode: Allows the driver to manually change gears using the steering wheel paddles or gear selector.
*Sport Mode: Provides faster gear changes and improved throttle response.
* Eco Mode: Optimizes gear shifting for improved fuel economy.
Care
* Change the gearbox oil and filter regularly according to the manufacturer’s recommendations.
* Do not overload the vehicle or tow trailers heavier than the specified weight.
* Avoid sudden acceleration and stopping.
Adviсe:
*If you get stuck in snow or mud, switch to manual gear shift and use a lower gear (such as 2 or 1).
*If the transmission does not shift properly, release the gas pedal and release the gear selector to neutral, wait a few seconds, and then shift it back into drive.
*If you have transmission problems, take them to a qualified mechanic.