Coding automatic transmission 09G using VAS-Diagnostic
Required equipment:
* VAS-Diagnostic interface
* Computer or laptop with VAS-PC software installed
Procedure:
1. Connect VAS-Diagnostician to the vehicle diagnostic connector.
2. Launch VAS-PC software.
3. Select a car from the list.
4. Go to the Transmission Electronics module.
5. Select the “Encoding” tab.
Encoding options:
| Parameter | Meaning | Description |
|—|—|—|
| Transmission type | 00 | Missing |
| Switch type | 00 | Shift Knob |
| Number of gears | 0D | 7 gears |
| Drive type | 00 | Front |
| Transmission oil type | 01 | G 052 162 |
| Allow manual switching | 00 | Disabled |
| Clutch adaptation | 00 | Disabled |
| Sports mode | 00 | Disabled |
Coding procedure:
1. Make the necessary changes to the encoding parameters.
2. Click the “Encode” button.
3. Confirm the encoding by clicking “Yes”.
4. Wait for the encoding process to complete.
Note:
*Always check codes for compatibility with your specific vehicle and transmission type.
* Incorrect coding may result in transmission malfunctions.
* Before performing the encoding procedure, it is recommended to make a backup copy of your existing settings.