Materials required to replace the Citroen automatic transmission filter:
* New automatic transmission filter
* Automatic transmission pan gasket
* Transmission oil (the quantity depends on the car model)
* Oil collection container
* Wrenches (screwdriver, wrenches, etc.)
Tools for replacing the Citroen automatic transmission filter:
* Device for pumping oil into automatic transmission
* Lift or pit
* Tool set
Procedure for replacing the Citroen automatic transmission filter:
1. Raise the car on a lift or over a pit.
2. Remove the engine protection, if equipped.
3. Unscrew the drain plug of the automatic transmission pan and drain the oil into a container.
4. Unscrew the bolts securing the automatic transmission pan and remove it along with the gasket.
5. Find the automatic transmission filter and remove it from the pan.
6. Install a new automatic transmission filter into the pan.
7. Place a new gasket on the automatic transmission pan and install the pan in place. Tighten the bolts to the specified torque.
8. Install the drain plug and tighten it.
9. Fill the automatic transmission with transmission oil through the dipstick hole or using an oil pump.
10. Check the oil level with a dipstick and add if necessary.
11. Reset the automatic transmission service counter (if required for your car model).
Important Notes:
* When replacing the automatic transmission filter, it is recommended to also change the transmission oil.
* The tightening torque of the automatic transmission pan mounting bolts should be indicated in the repair manual for your specific vehicle.
*When tightening bolts, use a torque wrench to ensure proper tightening torque.
* It is recommended that you consult a professional mechanic if you do not have experience with transmissions.