Automatic transmission cooling radiator for Chevrolet Epica
The automatic transmission (automatic transmission) cooling system in the Chevrolet Epica consists of an automatic transmission radiator, cooling pipes and a pump. The automatic transmission radiator serves to remove excess heat generated during operation of the transmission.
Location and replacement
The automatic transmission radiator in the Chevrolet Epica is located in front of the main radiator of the engine cooling system. To replace the automatic transmission radiator you must:
1. Drain the coolant from the automatic transmission cooling system.
2. Remove the engine protection and the lower part of the front bumper.
3. Disconnect the cooling pipes from the automatic transmission radiator.
4. Unscrew the automatic transmission radiator fastenings.
5. Remove the old radiator and install a new one.
6. Tighten the fasteners, connect the cooling pipes and fill with coolant.
Peculiarities
The coolant in the Chevrolet Epica automatic transmission cooling system is separate from the main engine cooling system. The volume of the system is about 5 liters. The recommended coolant is DEXRON VI.
The frequency of replacing coolant in the Chevrolet Epica automatic transmission cooling system is 60,000 km or 5 years of operation.