Materials required to change automatic transmission oil in Volkswagen Phaeton:
* New automatic transmission oil (VW G 052 162 A2; about 7-9 liters)
* New automatic transmission oil filter (VW 09D 325 429)
* O-ring for automatic transmission pan (VW N904 802 01)
* O-ring for oil pan (VW N022 325 01)
* Wrenches and tools for loosening bolts and nuts
* Funnel for filling oil
* Diagnostic scanner (to check oil level)
Procedure for changing automatic transmission oil in a Volkswagen Phaeton:
1. Preparation:
* Place the car on a flat surface.
* Set the gear shift lever to “P” position.
* Stop the engine and let it cool.
2. Draining old oil:
* Locate the automatic transmission pan under the car.
* Clean the pan bolts from dirt.
* Unscrew the pan bolts and remove it.
* Drain the old oil into a prepared container.
* Replace the pan o-ring with a new one.
3. Replacing the oil filter:
* Remove the old oil filter from the automatic transmission housing.
* Install the new oil filter in place.
* Make sure it is installed correctly.
4. Installing the automatic transmission pan:
* Reinstall the automatic transmission pan.
* Install new bolts and tighten them to the appropriate torque.
5. Filling with new oil:
* Using a funnel, pour new automatic transmission oil into the gearbox.
* Fill in as much oil as was drained.
6. Checking the oil level:
*Connect the diagnostic scanner to the car.
* Start the engine and let it idle.
* Select the appropriate function on the scanner to check the automatic transmission oil level.
* The oil level must be within the specified range.
7. Cleaning and reset:
* Clean all tools and work area.
* Reset the automatic transmission oil change counter using a diagnostic scanner.
8. Test drive:
* Start the engine and drive several kilometers in different modes.
* Check for leaks or other problems.
Notes:
* It is recommended to change the automatic transmission oil in the Volkswagen Phaeton every 60,000-80,000 kilometers.
* Use only oil and filter recommended by the manufacturer.
*If you are unsure of your technical skills, have a qualified mechanic perform this procedure.