Required materials and tools:

* New transmission oil for automatic transmissions (the specific type depends on the model and year of Ford Focus)
* New transmission pan gasket
* New oil filter (optional)
* Funnel
* Set of keys
* Pliers
* Oil drain pan with a capacity of at least 4 liters

Steps to change the oil in a Ford Focus automatic transmission:

1. Prepare the vehicle: Place the vehicle on a level surface and set the parking brake.

2. Remove the sump guard (if equipped): Most Ford Focus models with automatic transmission have a sump guard that must be removed to access the transmission pan.

3. Place an oil drain pan under the vehicle: Place the pan under the transmission drain plug.

4. Unscrew the drain plug: Locate the drain plug on the transmission pan and unscrew it using a wrench. Be careful not to drop the drain plug into the pan.

5. Drain the old oil: Allow the old oil to drain into the pan. This may take some time, so be patient.

6. Replace the drain plug: When all the oil has drained, clean the drain plug and replace it with a new gasket. Tighten the drain plug using a wrench.

7. Remove the transmission pan: Remove the bolts that secure the transmission pan to the transmission housing. Be careful as some oil may remain in the pan.

8. Clean the tray and magnet: Clean the tray and magnet to which metal particles are stuck.

9. Replace Oil Filter (Optional): If your Ford Focus model has a transmission oil filter, replace it with a new one.

10. Install the transmission pan: Apply sealant to the new transmission pan seal and install the pan in place. Tighten the pan mounting bolts.

11. Fill with new oil: Using a funnel, pour new gear oil into the transmission. Fill with the amount of oil specified in your vehicle’s owner’s manual.

12. Check the oil level: Start the engine and let it idle for a few minutes. Then shift the shift lever to each position and return to the park position. Check the oil level using the dipstick. The oil level should be between the “MIN” and “MAX” marks on the dipstick.

13. Install the sump guard (if equipped): If you removed the sump guard, reinstall it.

14. Dispose of old oil: Drain the old oil and dispose of it according to local regulations.

Adviсe:

*Always use the transmission oil recommended for your specific Ford Focus model.
* Check the gearbox oil level regularly and top up if necessary.
*If your transmission oil turns dark or smells burnt, this is a sign that it needs to be changed.
*If you do not have mechanical experience, it is best to have a certified mechanic change your transmission oil.

Leave a Reply