Automatic transmission selector Nissan Tiida C11 HR16 left-hand drive
Key points:
*P (Park): Locks the transmission output shafts to prevent the vehicle from moving.
* R (Reverse): Engages reverse gear.
* N (Neutral): Disconnects the transmission output shafts from the engine.
* D (Drive): Enables normal driving mode, which provides automatic gear changes based on engine load and vehicle speed.
* L (Low): Provides increased torque at low speeds and is used for climbing steep grades or towing loads.
Auxiliary modes:
* M (Manual): Allows the driver to manually change gears using the automatic transmission selector.
*S (Sport Mode): Optimizes shift points and engine characteristics for a sportier ride.
* Eco: Prioritizes fuel economy by upshifting earlier.
* Brake: Increases the effect of engine braking to slow down the vehicle.
Brake release function:
* The automatic transmission selector must be in position P or N before releasing the brake pedal.
* When you engage the D or R position from the P position, an audible signal will sound to remind you to apply the brake pedal.
Peculiarities:
* Electronic automatic transmission selector (not mechanical).
* Additional automatic transmission selector unlock button, located under the selector, for switching from position P to other positions.
Notes:
* It is not recommended to switch the automatic transmission selector while the car is moving.
* If the automatic transmission selector is stuck, take it to a professional mechanic.
* Maintain the automatic transmission regularly, replacing the transmission fluid and filter.