Location of automatic transmission oil temperature sensor in Nissan Terrano
The automatic transmission oil temperature sensor in the Nissan Terrano is usually located:
* On the automatic transmission tray.
* Near the automatic transmission oil filter.
* In the automatic transmission housing.
Procedure for replacing the automatic transmission oil temperature sensor
Tools and materials:
* New automatic transmission oil temperature sensor.
* Wrench or socket of appropriate size.
* Washer (if required, depending on the car model).
* Transmission fluid (to replenish if some of the fluid leaks).
Steps:
1. Place the vehicle in park and place the gear shift lever in the park position (P).
2. Find the automatic transmission oil temperature sensor.
3. Disconnect the electrical connector from the sensor.
4. Loosen the sensor mounting bolt or nut.
5. Carefully remove the sensor.
6. Install a new sensor with a new washer (if necessary).
7. Tighten the sensor mounting bolt or nut.
8. Connect the electrical connector to the new sensor.
9. Check the transmission fluid level and add it if necessary.
Note:
* Make sure the new automatic transmission oil temperature sensor is suitable for your specific model and year of vehicle.
*When replacing the sensor, a small amount of transmission fluid may leak, so be careful and use a suitable container to catch the fluid.
*If you are unsure of your abilities, seek assistance from a qualified mechanic.