Step 1: Familiarize yourself with the gearbox
*Locate the gear selector on the center console.
* Become familiar with the different selector positions: P (park), R (reverse), N (neutral), D (forward) and others (eg S, M).
Step 2: Starting the Engine
*Press the brake pedal.
* Move the gear selector to P (park).
* Insert the key and turn it to start the engine.
Step 3: Enter Drive Mode
* Release the brake pedal.
* Move the gear selector to position D (forward).
Step 4: Start moving
* Press the accelerator pedal and begin to release it smoothly.
* The car should start moving without jerking or slipping.
Step 5: Speed Control
* Use the accelerator pedal to adjust the speed.
* The harder you press the accelerator, the faster the car will move.
* To slow down, release the accelerator pedal or lightly press the brake pedal.
Step 6: Stopping the Vehicle
* To stop the car, press the brake pedal.
* Move the gear selector to P (park).
Adviсe:
*Always use the brake pedal before shifting the gear selector.
* Do not shift into neutral when driving on slopes as this may cause you to lose control.
* Explore the functions of additional modes (e.g. S, M) that can help in specific situations such as sport driving or towing.
*Service your transmission regularly to ensure optimal performance.
Warnings:
* Do not place the vehicle in P (park) while driving as this may damage the transmission.
* Do not shift the gear selector to R (Reverse) at speed, as this may also damage the transmission.
* If you begin to hear unusual noises from the transmission, contact your mechanic immediately.