Materials:
* LED strip (any color, preferably waterproof)
* Power cord
* Connectors for wires
* Heat shrink tube
* Electrical tape
* Alcohol wipes or degreaser
* Wire clamps
Tools:
* Flat head screwdriver
* Phillips screwdriver
* Wire scissors
* Lighter or heat gun
* Multimeter (optional)
Instructions:
1. Preparation:
* Clean the area around the automatic transmission with alcohol wipes or degreaser.
* Cut the LED strip to the required length to fit around the transmission pan.
2. Connecting wires to the LED strip:
* Identify the positive and negative pins on the LED strip.
*Connect the power wire to the corresponding pins on the LED strip.
* Secure connections using wire connectors.
* Protect the connections with heat shrink tubing and heat it with a lighter or heat gun.
3. Installation of LED strip:
* Remove the transmission panel using a flathead screwdriver or a Phillips screwdriver.
* Find a convenient place to attach the LED strip around the automatic transmission pan.
* Glue the LED strip in place or use wire clips to secure it.
4. Power connection:
*Locate the power source, such as the dashboard light or ACC wire (accessories).
*Connect the power wire from the LED strip to the power source.
* Protect the connection with electrical tape.
5. Testing:
* Turn the ignition on or turn the key to ACC position.
* The LED strip should light up.
* If it does not light up, check the connections, fuses and make sure the LED strip is connected correctly.
6. Panel installation:
* Reinstall the panel under the automatic transmission.
Adviсe:
*Use waterproof LED strip to protect it from road dirt and water.
*Attach the LED strip securely to prevent it from coming off or being damaged.
* Protect all electrical connections from short circuits.
*Check local laws and safety regulations before installing lighting modifications on your vehicle.