Required materials:
* LED strip (color of your choice)
* Wires
* Connectors
* Soldering iron
* Heat shrink tube
* Electrical tape
Instructions:
1. Remove the automatic transmission panel. To do this, unscrew the two bolts at the bottom of the panel and pull it towards you.
2. Stretch the LED strip. Cut the tape to the required length and stretch it along the edges of the automatic transmission panel.
3. Connect the LED strip to power. Connect the wires to the cigarette lighter socket or other power source.
4. Solder the connections. Solder the wires to the LED strip and protect the connections with heat shrink tubing.
5. Insulate the wiring. Cover wiring with electrical tape to prevent short circuits.
6. Reinstall the automatic transmission panel. Press the panel until it snaps into place.
Adviсe:
*Choose the LED strip color that complements your car’s interior.
* Make sure that the LED strip will not interfere with the movement of the gear selector.
* Check all connections before installing the panel in place.
*If necessary, use glue or double-sided tape to secure the LED strip.