Materials:
*Genuine leather or eco-leather
* Polyester or nylon threads
*Leather needle or thick sewing needle
* Waxed cord (optional)
* Leather glue (optional)
Tools:
* Leather cutting knife
* Ruler or measuring tape
* Awl or gypsy needle
* Pliers
* Scissors
Instructions:
1. Remove the automatic transmission handle
*Transmission shift knob design may vary depending on Sportage model, so please refer to your vehicle’s owner’s manual or consult a mechanic.
2. Open the leather template
* Measure the dimensions of the automatic transmission handle and make a pattern from leather, ensuring allowance for the seams.
*If you use eco-leather, make sure to cut it according to the grain direction.
3. Apply glue (optional)
*For added adhesion, you can apply a thin layer of leather glue to the underside of the leather.
4. Sew the skin
* Using a thick needle and strong threads, sew a piece of leather around the perimeter, leaving a hole for threading a cord or for sewing the automatic transmission handle to the frame.
*Use an overlap stitch or a double needle stitch for strength.
5. Finish the edges of the leather
*After stitching, trim away any excess skin around the edges.
*To prevent edges from fraying, paint them with leather paint or wax.
6. Thread cord or sew to frame (optional)
*If you are using cord, pull it through the hole in the leather and secure it with knots or glue.
* If you are sewing leather to the transmission handle frame, use the same threads that you used for stitching.
7. Reinstall the automatic transmission handle
* Assemble the automatic transmission handle by installing a leather cover on the frame and securing it in the car.
Adviсe:
*Use high quality leather or eco-leather for durability.
*Hand stitch the leather to ensure precision and strength.
*Add embossing or embroidery for a custom look.
*Use a leather wax or conditioner to maintain the softness and appearance of the leather.