Part Number: 09G321371E
Tools required for replacement:
* Set of socket wrenches
* Hex key 8mm
* Torque wrench
* Pliers
* Brake cleaner
* Sealant for automatic transmission
Replacement steps:
1. Place the vehicle on a lift. Remove the front left lower protective sheet.
2. Drain the transmission fluid. Disconnect the automatic transmission oil pan and drain the fluid into a container.
3. Remove the oil pan. Remove the bolts that secure the oil pan to the transmission housing. Remove the oil pan carefully to avoid damaging the gasket.
4. Clean surfaces. Clean the surfaces of the transmission case and oil pan of old sealant and debris using brake cleaner.
5. Apply sealant. Apply a thin layer of transmission sealant to both sides of the new gasket.
6. Install the gasket and oil pan. Place a new gasket on the transmission housing and secure it. Install the oil pan and tighten the bolts using a torque wrench to 10 Nm.
7. Fill with new transmission fluid. Fill in new transmission fluid through the automatic transmission filler plug. Check the fluid level and add as necessary.
8. Reinstall the bottom protective sheet. Install and tighten the bottom protective sheet.
9. Reset the automatic transmission oil change counter. Using an OBD-II scanner, reset the automatic transmission oil change counter in the transmission control module (TCM).
10. Test drive. Drive the car and check for leaks and proper operation of the automatic transmission.