Automatic transmission cooling fittings for Pajero 4
The Mitsubishi Pajero 4 uses an automatic transmission (automatic transmission) with a cooling system. Automatic transmission cooling is necessary to maintain optimal operating temperature and prevent overheating.
Location of automatic transmission cooling fittings
The automatic transmission cooling fittings are located on the gearbox housing:
* Inlet: Top
* Outlet fitting: Bottom
Connecting cooling hoses
Automatic transmission cooling hoses are connected to the fittings as follows:
* Incoming hose: Connects to the fitting located on the top of the automatic transmission housing and connects to the cooling radiator.
* Outgoing hose: Connects to the fitting located on the bottom of the automatic transmission housing and returns to the cooling radiator.
Technical characteristics of fittings
Automatic transmission cooling fittings on Pajero 4 have the following technical characteristics:
* Connection type: SAE J512 fitting
* Thread: M14 x 1.5
*Hose hole diameter: 10mm
Replacing automatic transmission cooling fittings
Replacing automatic transmission cooling fittings may be necessary if they are damaged or leaking. To replace the fittings, you will need a special tool for unscrewing and tightening the fittings.
Note: It is recommended that the automatic transmission cooler fittings be replaced by a qualified mechanic.