Tools required to reset automatic transmission adaptation on Hyundai Tucson:
* OBD2 scanner
* Hyundai diagnostic software (such as GDS or SDS)
Steps to reset automatic transmission adaptation on Hyundai Tucson:
1. Connect the OBD2 scanner to the vehicle’s diagnostic port.
2. Launch the Hyundai diagnostic software on your computer.
3. Establish communication between the scanner and the software.
4. Select the Transmission Control Module (TCM) from the list of available modules.
5. Find and select the “Transmission Adaptation Reset” function or similar option.
6. Follow the software prompts to confirm the adaptation reset.
7. Turn off the engine and wait at least 30 seconds.
8. Start the engine and let it idle for a few minutes. This will allow the transmission to re-adapt to your driving style.
Note:
* Resetting the automatic transmission adaptation will delete all previously learned adaptations and program preferences.
* It may take several driving cycles for the transmission to fully adapt to your driving style.
*If you experience transmission problems after resetting the adaptation, please contact a qualified mechanic for diagnosis.