After a major overhaul of the automatic transmission engine
Checking the level and condition of the automatic transmission fluid
* Check the automatic transmission fluid level with the engine running and in park mode.
* Automatic transmission fluid should be red or green, without the smell of burning or metal particles.
Resetting automatic transmission adaptations
* To reset automatic transmission adaptations, disconnect the negative terminal of the battery for 10 minutes.
* After connecting the battery, start the engine and let it idle for 10 minutes, shifting from Park to Drive and back again.
Rolling in automatic transmission
* During the first 500-1000 km after major repairs, drive the car smoothly, without sudden starts or accelerations.
* This will allow the new parts to break in and avoid overheating.
Automatic transmission temperature monitoring
* Monitor the automatic transmission temperature using the on-board computer or a special scanner.
* Normal automatic transmission temperature is 80-100 °C. If the temperature exceeds 110 °C, this may indicate problems with the automatic transmission.
Leak check
* Check the automatic transmission regularly for leaks. Leaks can cause low fluid levels and damage the transmission.
Replacing the automatic transmission filter
* As part of a major overhaul, the automatic transmission filter is usually replaced. If the filter has not been replaced, do so as soon as possible.
Other recommendations
* Use only recommended automatic transmission fluid.
* Maintain your automatic transmission regularly, including replacing the fluid and filter as scheduled.
* Avoid towing heavy loads.
* If you notice signs of automatic transmission failure, such as slipping, jerking or loss of power, seek professional help immediately.