Adaptation of automatic transmission SsangYong Actyon New diesel
Required equipment:
* Diagnostic scanner with SsangYong support
* Computer with software
Adaptation procedure:
1. Start the engine.
2. Set the gear shift lever to ‘P’ position.
3. Connect the scanner to the vehicle’s diagnostic connector.
4. Launch the software on your computer.
5. Select your car make and model.
6. Go to the ‘Transmission’ section.
7. Select the ‘Automatic transmission adaptation’ function.
8. Follow the instructions on the scanner screen. Typically they include the following steps:
* Setting the gear lever to all positions (P, R, N, D, S) for a certain number of seconds.
* Accelerate and decelerate vehicle according to manufacturer specifications.
9. When the adaptation procedure is completed, turn off the engine.
10. Start the engine again.
11. Check the operation of the automatic transmission for any improvements.
Notes:
* Adaptation of the automatic transmission may be required after replacing the gearbox, control unit or performing major repairs.
* The adaptation procedure varies depending on the vehicle model and year of manufacture. Always check your specific vehicle’s service manual for the exact procedure.
* If you have problems adapting the automatic transmission, contact a qualified mechanic.