Adaptation of 6-speed automatic transmission Kia Rio 3
Required tools and equipment:
* OBDII Diagnostic Scanner
*Laptop or tablet with diagnostic software
Adaptation steps:
1. Prepare the car:
* Drive the car into the parking lot.
* Move the gear shift lever to Park (P) position.
* Connect the diagnostic scanner to the car’s OBDII port.
2. Run diagnostic software:
* Open diagnostic software on your laptop or tablet.
* Establish communication with OBDII scanner.
3. Define the adaptation procedure:
* In the diagnostic software, go to the ‘Transmission’ section.
* Find the procedure ‘Automatic transmission adaptation’ or ‘Automatic transmission calibration’.
4. Follow the on-screen instructions:
* After selecting the onboarding procedure, follow the on-screen instructions.
*Usually instructions include:
* Clear fault codes
* Switching the gear lever to different positions
* Starting and stopping the engine
* Checking the automatic transmission fluid level (if necessary)
5. Complete the procedure:
* Once the adaptation procedure is completed, the software will display a success message.
* Turn off the engine and disconnect the OBDII scanner.
Note:
* The adaptation procedure may vary depending on the vehicle year and diagnostic software version.
* It is recommended that you consult your service manual or authorized dealer for exact instructions for your specific vehicle.
* Improper execution of the adaptation procedure can lead to problems with the operation of the automatic transmission.