Stages of adaptation of the Chevrolet Cruze automatic transmission:
1. Connecting a diagnostic scanner:
* Connect the OBD-II diagnostic scanner to the vehicle’s diagnostic port.
* Turn on the ignition without starting the engine.
2. Access to the automatic transmission control unit:
*Using the scanner menu, navigate to the Transmission Control Module (TCM).
3.Transmission type identification:
* Determine the type of automatic transmission installed in your Chevrolet Cruze.
*This information is usually found on a label on the transmission or in the vehicle’s manual.
4. Selecting an adaptation procedure:
* In the TCM menu, find the adaptation procedure for the corresponding transmission type.
* Select the appropriate procedure depending on the work performed.
5. Carrying out the adaptation procedure:
*Follow the instructions on the scanner screen to complete the adaptation procedure.
*The procedure typically involves changing gears at various speeds and under various driving conditions.
6. Reset adaptive values:
* After completing the adaptation procedure, reset the TCM adaptive values.
*This procedure will clear all previously learned driving parameters and reset the TCM to factory settings.
7. Completion of the procedure:
* Turn off the ignition and disconnect the scanner.
* Start the engine and check if the gears shift correctly.
Note:
*Exact adaptation steps may vary slightly depending on vehicle year and transmission model.
* It is recommended that you consult your vehicle’s manual or a qualified mechanic for specific instructions.