Automatic transmission control
1. Park (P): This gear is used to park the vehicle and keep it in place.
2. Reverse (R): This gear is used to move the vehicle in reverse direction.
3. Neutral (N): This gear disengages the transmission from the engine, allowing the vehicle to roll.
4. Overdrive (D): This gear is used for normal forward driving.
5. Overdrive (3 or L): These gears are used when driving at low speeds or when driving on a slope or with a trailer.
6. Sport Mode (S or M): These modes provide sportier handling by allowing manual upshifts and downshifts.
Basic operating instructions:
* Starting the engine: Move the gear selector to position P or N and press the start button.
* Shifting gears: Press the brake pedal and move the gear selector to the gew?nschte position.
* Driving forward: Move the gear selector to position D and release the brake pedal.
* Reverse driving: Move the gear selector to position R and release the brake pedal.
* Stopping: Press the brake pedal and move the gear selector to position P.
Tips and warnings:
* Do not change gears manually while the vehicle is moving.
* Avoid shifting between P and R while the car is moving.
* Avoid overheating the transmission when driving in traffic or with a heavy trailer.
*Service your transmission regularly to extend its life.
*If you encounter any problems with the transmission, contact your mechanic.