Repair of automatic transmission of diesel SSangYong Actyon
Diagnostics
* Computer diagnostics using a scanner to identify fault codes.
* Visually inspect the transmission for leaks, damage and wear.
* Checking the level and condition of the transmission fluid.
Required parts and materials
* Automatic transmission clutch kit
* Valve block with solenoids
* Automatic transmission filter
* Transmission fluid
* Automatic transmission crankcase gasket
* Various gaskets, seals and o-rings
Repair stages
1. Removing the automatic transmission:
* Disconnecting the battery
* Removing the air filter and other components that impede access to the automatic transmission
* Disconnecting drive shafts, wiring harnesses and tubes
* Loosening the automatic transmission mounting bolts and removing it
2. Disassembling the automatic transmission:
* Removing the automatic transmission housing
* Removing and replacing worn clutches, friction plates and steel discs
* Clean and check all components for damage
3. Replacing the valve body:
* Removing the valve body with solenoids
* Replacement of faulty solenoids
* Installation of a new valve body
4. Automatic transmission assembly:
* Installation of new gaskets and seals
* Assembling the automatic transmission in reverse order
* Checking the correct functioning of all components
5. Installing an automatic transmission on a car:
* Reinstalling the automatic transmission
* Connecting all components
* Filling with transmission fluid and checking the level
6. Run-in and adaptation:
* Conducting a test drive to check the operation of the automatic transmission
* Adaptation of automatic transmission to vehicle parameters using diagnostic equipment
Additional recommendations
* Use of original spare parts and transmission fluids recommended by the manufacturer.
* Regular replacement of transmission fluid and automatic transmission filter in accordance with the maintenance regulations.
* Avoid sudden gear changes and do not overload the automatic transmission.
* If signs of automatic transmission malfunction appear (slipping, jerking, noise), immediately contact a service station.