Peugeot automatic transmission oil pump oil seal
Peugeot automatic transmission oil pump oil seal is a seal that prevents transmission fluid from leaking from the pump. It is usually made of rubber or fluoroelastomer and is mounted around the oil pump shaft.
Functions of the automatic transmission oil pump oil seal:
*Prevents transmission fluid leakage
* Protects internal pump components from contamination and moisture
* Provides a tight seal between the pump shaft and the gearbox housing
When should you replace the automatic transmission oil pump seal:
* Transmission fluid leaking from the front of the gearbox
* Contaminated or low transmission fluid
* Increased noise or vibration when operating the gearbox
Consequences of untimely replacement of the automatic transmission oil pump oil seal:
* Leaking transmission fluid can cause damage to internal transmission components and ultimately cause failure.
* Contaminated transmission fluid can cause premature wear and failure of transmission components.
* Reduced transmission fluid levels can cause overheating and damage to the transmission.
Procedure for replacing the automatic transmission oil pump seal:
Replacing an automatic transmission oil pump seal requires special knowledge and tools. It usually includes the following steps:
1. Remove the transmission pan
2. Remove the oil pump
3. Remove the old oil seal
4. Install a new oil seal
5. Reinstall the oil pump
6. Install the transmission pan
7. Fill the gearbox with transmission fluid
Cost of replacing an automatic transmission oil pump oil seal:
The cost of replacing an automatic transmission oil pump seal varies depending on the make and model of the car, as well as the complexity of the job. Typically, the cost ranges from $200 to $500.
Adviсe:
* Check the level and condition of the transmission fluid regularly.
* Watch for signs of transmission fluid leaks.
* Replace the automatic transmission oil pump seal in a timely manner to avoid serious problems.