Bulb type: Wedge T10 (W5W)
Location:
1. Shift the gear selector to Park position.
2. Locate the illuminated panel near the gear selector.
3. Insert a thin screwdriver or plastic tool into the side slot of the panel and carefully pry it up.
4. Gently pull the panel towards you to remove it from the console.
5. Locate the light bulb socket that is attached to the back of the panel.
6. Press the chuck latch and pull it out of the panel.
7. Remove the old light bulb from the socket by pulling the transparent cap.
Installing a new light bulb:
1. Insert a new Wedge T10 (W5W) light bulb into the socket, aligning the pins with the corresponding connectors.
2. Insert the cartridge back into the panel.
3. Click the cartridge into place.
4. Reinstall the panel, aligning it with the console.
5. Press the panel to lock it into place.