Automatic transmission cooling radiator for Dodge Stratus

Various automatic transmission coolers are available for Dodge Stratus depending on the year of manufacture and engine model. Below are some common options:

2001-2006 (3.0 L)

*Mopar 4677442AC
* Spectra Premium CU2172
* Denso 193-1722

2001-2006 (2.4 L)

* Mopar 4677441AA
* Spectra Premium CU2171
* Denso 193-1723

2007-2009 (all engines)

* Mopar 68055551AA
* Spectra Premium CU3851
* Denso 193-1734

Replacement of automatic transmission cooling radiator

Replacing an automatic transmission cooler on a Dodge Stratus requires certain tools and skills. Below are the main steps:

1. Relieve pressure in the transmission system by disconnecting the negative battery terminal.
2. Raise the car and place it on jacks.
3. Remove the shields and covers that provide access to the radiator.
4. Disconnect the transmission fluid cooling lines from the radiator.
5. Unscrew the bolts securing the radiator to the car frame.
6. Remove the old radiator and install the new one.
7. Tighten the bolts and connect the cooling lines.
8. Add transmission fluid to the required level.
9. Reinstall the removed parts and start the engine.
10. Check for leaks and make sure the system is working properly.

Adviсe:

*Only use the correct radiator for your specific vehicle and year of manufacture.
* Replace cooling lines if they are old or damaged.
*Add the same type of transmission fluid as previously used.
* Flush the transmission cooling system after replacing the radiator.

Leave a Reply