The procedure for starting off on an automatic transmission is:
1. Selector in “D” (Drive): Set the gear selector to “D” to drive forward.
2. Release the brake: Do not apply excessive force to the brake pedal.
3. Lightly press the gas pedal: The car will begin to move forward smoothly.
Additional tips:
*You keep your foot on the brake: The brake pedal is pressed to hold the car in place with the gear engaged. When you release the brake, the car will begin to move.
* Using the accelerator pedal: Adjust the amount of gas to control the vehicle speed.
* Pressing the gas pedal lightly: Pressing the gas pedal too hard may result in sudden acceleration.
* Shifting to Neutral (N): If you make a long stop, for example at a traffic light, it is recommended to shift the selector to the “N” (Neutral) position.
* Reverse: To drive backward, move the selector to the “R” (Reverse) position.
Note:
*Some automatic transmissions may have other modes, such as “S” (Sport) or “L” (Low), that change the shift characteristics.
* It is recommended that you consult your owner’s manual for specific instructions for your vehicle.