Location of automatic transmission speed sensor on Honda CR-V RD1:
* The sensor is located on the left side of the transmission, next to the exhaust manifold.
* It is connected to the wiring harness running at the bottom left front corner of the engine.
How to replace an automatic transmission speed sensor on a Honda CR-V RD1:
1. Raise the vehicle and place it on stands.
2. Locate the automatic transmission speed sensor located on the transmission.
3. Disconnect the electrical connector of the sensor.
4. Use a 17mm wrench to unscrew the sensor from the transmission.
5. Install the new sensor and tighten it to 20 Nm.
6. Connect the electrical connector.
7. Lower the vehicle.
Tools required to replace the automatic transmission speed sensor on a Honda CR-V RD1:
* 17mm wrench
* Supports for cars
* Rags
Possible malfunctions of the automatic transmission speed sensor on Honda CR-V RD1:
* Incorrect speed readings
* Gear slippage
* Difficulty shifting gears
*Storing transmission related fault codes