Technological process of automatic transmission repair
1. Diagnostics
* Visual inspection of the automatic transmission for leaks, damage and dirt.
* Scan error codes using a diagnostic scanner.
* Test drive to evaluate performance and identify problems.
2. Dismantling the automatic transmission
* Disconnecting electronic connectors and hydraulic lines.
* Disconnecting the transmission from the engine.
* Removing the automatic transmission from the car.
3. Disassembling and washing the automatic transmission
* Disassembling the automatic transmission into individual components.
* Cleaning parts from dirt, chips and metal particles.
4. Inspection and troubleshooting
* Visual inspection of parts for wear, damage and defects.
* Measurement of gaps, backlashes and other parameters according to technical specifications.
5. Replacement or repair of parts
*Replacement of worn or damaged parts such as friction discs, steel discs, torque converter, etc.
* Repair or restoration of parts such as automatic transmission housing, gears and shafts.
6. Automatic transmission assembly
* Automatic transmission assembly in accordance with technical specifications.
* Installation of new gaskets and seals.
* Check for correct assembly and leaks.
7. Automatic transmission installation
* Installation of automatic transmission on a car.
* Connecting electronic connectors and hydraulic lines.
* Final tightening of bolts and fasteners.
8. Filling and checking the automatic transmission
* Filling the automatic transmission with transmission fluid.
* Checking the fluid level and its quality.
9. Testing
* Test drive to evaluate the performance of the automatic transmission after repair.
* Scan error codes for problems.
10. Warranty
* Providing a guarantee for work performed and parts replaced.