Gear shift lever of an automatic transmission (automatic transmission) Ford Focus 2 restyling
Disassembling the gear shift lever:
1. Place the gear shift lever in neutral.
2. Remove the decorative cover from the base of the lever.
3. Unscrew the two bolts under the cover that secure the lever to the automatic transmission selector.
4. Slide the lever up to remove it from the selector.
Gear shift lever assembly:
1. Install the lever on the automatic transmission selector, aligning it with the grooves.
2. Tighten the two bolts that secure the lever to the selector.
3. Install the decorative cover on the base of the lever.
Replacing the automatic transmission mode control button:
The automatic transmission mode control button (P-R-N-D-S) is located on the gear shift lever. To replace it:
1. Remove the decorative cover from the base of the lever.
2. Disconnect the connector from the mode control button.
3. Press the latches and pull the button up to remove it from the lever.
4. Install the new button and snap it into place.
5. Connect the connector.
6. Reinstall the decorative cover.
Adviсe:
*Before disassembling the gearshift lever, disconnect the battery.
* Be careful with wires and contacts when disconnecting the mode button connector.
* When installing a new lever, check whether it moves correctly in all automatic transmission modes.