Automatic transmission drive oil seal for Toyota Camry XV40:
*Original part number: 90311-38008
* Substitutes:
*Corteco 19031730B
* Elring 330.784
* Febi Bilstein 01234
* Meyle 300 613 0004
* SKF VKD45390
*Features:
*Inner diameter: 27mm
*Outer diameter: 42.4mm
* Width: 6.5 mm
* Location: Installed on the CV joint of the automatic transmission drive, on the engine side.
* Function: Prevents transmission fluid from leaking through the CV joint hole.
Replacement Tips:
* To replace the oil seal, you must remove the automatic transmission drive.
* Use a new oil seal and carefully drive it into place using a driver or suitable tool.
*Clean the surface before installation to ensure sealing.
* Tighten the drive to the required torque specified in the repair manual.
* Fill the automatic transmission with new transmission fluid after installing the drive.