Automatic transmission cooling pipe Suzuki SX4
The automatic transmission cooling pipe in the Suzuki SX4 performs an important function in removing heat from the gearbox. It connects the automatic transmission housing to the cooling radiator.
Replacing the automatic transmission cooling pipe
Replacing the automatic transmission coolant pipe may be necessary if it is leaking, damaged, or clogged. The replacement procedure includes the following steps:
1. Disconnect the negative battery terminal for safety.
2. Remove the engine protective cover.
3. Loosen the clamps holding the cooling pipe.
4. Disconnect the cooling pipe from the automatic transmission and radiator.
5. Rinse and blow through the new cooling tube to remove any contamination.
6. Install the new cooling pipe in place and tighten the clamps.
7. Connect the negative terminal of the battery.
8. Start the engine and check for leaks.
Recommendations
* Use only automatic transmission coolant pipe recommended by the manufacturer.
*Tighten the clamps to the specified torque.
* Replace the automatic transmission coolant pipe as soon as possible after detecting a leak or damage.
* Regularly check the condition of the automatic transmission coolant pipe for signs of leakage or damage.
Part number
The automatic transmission coolant pipe part number for Suzuki SX4 may vary depending on the year of manufacture and model. Consult your local dealer or check your repair manual for exact information about the specific part number for your vehicle.