Automatic transmission cooling pipe clamp for Mercedes-Benz W203
Part number: 140 270 03 65
Location:
The lock is located on the right side of the transmission, next to the automatic transmission cooling pipe.
Function:
The retainer holds the automatic transmission coolant tube in place and provides a connection between the tube and the transmission housing.
Installation:
1. Locate the automatic transmission coolant pipe retainer on the right side of the transmission.
2. Disconnect the plastic connector with electrical wires, if present.
3. Grasp the latch and pull it straight up until it releases.
4. Insert the new automatic transmission cooling pipe into the retainer and snap it into place.
5. Connect the electrical connector, if equipped.
Note:
*Retainer replacement requires a minimum level of mechanical skill.
*If you are unsure of your ability to complete the installation, consult a qualified mechanic.
* When installing the automatic transmission coolant pipe, make sure the spring clamps are properly tightened.