Adjusting the automatic transmission cable of Passat B5
Required tools:
* Set of keys
* Pliers
* Spline
* Measuring ruler
Adjustment instructions:
1. Place the car in park.
2. Jack up the front of the car.
3. Install supports.
4. Remove the engine air filter cover.
5. Find the automatic transmission cable. It is located on the left side of the engine and connects to the gear shift lever.
6. Unscrew the bolt securing the automatic transmission cable to the gear shift lever.
7. Turn on the ignition.
8. Place the gear shift lever in the park position.
9. Move the slider on the automatic transmission cable to the car body.
10. Tighten the bolt on the automatic transmission cable.
11. Turn off the ignition.
12. Check the position of the gear shift lever. It should be centered in the park position.
13. Measure the distance from the center of the automatic transmission cable slider rod to the car body. It should be 15.5 mm.
14. If necessary, adjust the position of the automatic transmission cable slider.
15. Install the air filter cover.
16. Lower the car.
Recommendations:
*Follow the instructions carefully to avoid incorrect adjustment and damage to the automatic transmission cable.
*If you are unsure of your skills, consult a qualified mechanic.
* Periodically check the automatic transmission cable adjustment and adjust it if necessary.