Adjusting the automatic transmission cable Peugeot 206
You will need:
* Set of spanners
* Pliers
* New adjusting nut (optional)
Instructions:
1. Loosen the cable on the gearbox:
— Locate the bolt securing the cable to the gearbox.
— Loosen the bolt with a spanner.
2. Adjust the cable:
— Move the adjusting nut up or down to achieve optimal cable tension.
— There should be enough tension to ensure smooth gear shifting, but not too much tension to damage the cable.
3. Check tension:
— Shift the gear lever to all positions.
— Gears should shift smoothly and clearly without sticking or difficulty.
4. Tighten the cable:
— Tighten the bolt securing the cable to the gearbox.
5. Install a new adjusting nut (optional):
— If the adjusting nut is worn or damaged, replace it with a new one.
— Install the new nut on the cable and tighten it with pliers.
Notes:
*If you have difficulty adjusting the cable, consult a qualified mechanic.
* Cable tension that is too loose or too tight can cause shifting problems.
* It is recommended to regularly check and adjust the automatic transmission cable to ensure optimal operation.