Method 1: Using an OBDII scanner
1. Connect the OBDII scanner to the vehicle’s diagnostic port.
2. Turn on the ignition, but do not start the engine.
3. In the scanner menu, find the “Automatic Transmission Adaptation” option.
4. Follow the scanner’s instructions to reset the adaptation.
Method 2: manual reset (for some KIA Sid models)
1. Turn on the ignition and warm up the engine to operating temperature.
2. Shift the gear selector to the “P” (park) position.
3. Press and hold the brake pedal.
4. Quickly shift the gear selector in the following sequence:
– P (Parking)
– R (Reverse)
– N (Neutral)
– D (Drive)
– 2 (Second gear)
– 1 (First gear)
– P (Parking)
5. Release the brake pedal.
6. Turn off the ignition.
Note:
* The delay time between gear changes should be about 2 seconds.
*If any errors occur during the procedure, stop and restart the process from step 1.
* Adaptation of the automatic transmission takes some time to fully adapt to your driving style. It is recommended to operate the vehicle smoothly for several days after the reset.