Resetting automatic transmission adaptation in SsangYong Kyron with diesel engine
Required tools:
* Car scanner supporting SsangYong
* OBD2 cable
Adaptation reset procedure:
1. Connect the scanner to the OBD2 connector of the car.
2. Turn on the ignition, but do not start the engine.
3. Launch the scanner software and select SsangYong Kyron as your car model.
4. Go to the “Transmission” or “Automatic Transmission” section.
5. Find the “Reset adaptations” or “Relearn automatic transmission” function.
6. Follow the instructions on the scanner screen. Typically the procedure includes:
* Confirmation of reset adaptations.
* Perform the reset procedure (this may take several minutes).
Note: Depending on your scanner model and software, the exact steps may vary. If you encounter any difficulties, refer to the scanner’s instruction manual.
After reset adaptation:
* Shift the gear selector to position “P”.
* Start the engine and let it idle for a few minutes.
* Do a short test drive to change all gears and give the transmission time to relearn.
Potential benefits of resetting automatic transmission adaptation:
* Improved gear shift quality
* Elimination of automatic transmission jerks or jerks
* Fuel consumption optimization
* Deleting stored errors in automatic transmission memory