Transmission seal (automatic transmission) for Ford Focus 2
Original part number:
* 1 717 286 – Automatic transmission front right axle shaft seal
* 1 606 654 – Automatic transmission rear left axle seal
Dimensions:
*Inner diameter: 27mm
*Outer diameter: 62mm
*Thickness: 12mm
Signs of oil seal failure:
*Transmission fluid leak
* Noise or vibration occurs
* Difficulty moving when changing gears
Replacing the oil seal:
It is recommended that you contact a qualified mechanic to replace the automatic transmission oil seal. Here are the general steps involved in the process:
1. Drain the transmission fluid.
2. Disconnect the drive shafts.
3. Remove the axle shaft.
4. Using a puller, remove the old oil seal.
5. Install the new oil seal, making sure it is installed correctly.
6. Reassemble all components in reverse order.
7. Fill in new transmission fluid.
Seal selection:
When choosing an automatic transmission oil seal for a Ford Focus 2, it is important to purchase original Ford spare parts or high-quality analogues. Poor seals can quickly fail, leading to further leaks and transmission problems.