Location of automatic transmission oil temperature sensor in Kia Sorento
The location of the automatic transmission oil temperature sensor in the Kia Sorento may vary depending on the year of manufacture and model of the car. However, as a rule, the sensor is located in the automatic transmission housing or on the automatic transmission pan.
In Kia Sorento models from 2011 to 2015:
* The automatic transmission oil temperature sensor is usually located on the automatic transmission housing, near the wiring harness connector.
In Kia Sorento models from 2016:
* The automatic transmission oil temperature sensor is located on the automatic transmission pan.
Instructions for replacing the automatic transmission oil temperature sensor
Required tools:
* Wrench or ratchet
*Head size 17mm or 19mm
* New automatic transmission oil temperature sensor
Steps:
1. Raise the car and place it on stands.
2. Determine the location of the automatic transmission oil temperature sensor.
3. Disconnect the electrical connector of the sensor.
4. Using a wrench or ratchet, unscrew the sensor.
5. Remove the old sensor.
6. Install the new sensor by hand tightening it.
7. Tighten the sensor with a wrench or ratchet to the torque specified in the service manual.
8. Connect the electrical connector to the new sensor.
9. Lower the vehicle and start the engine.
10. Check for leaks or unusual noises.
Note: It is recommended that the automatic transmission oil temperature sensor be replaced by a qualified mechanic as the procedure can be complex and requires specialized knowledge.