Location of the speed sensor on a Mazda Tribute with automatic transmission
The speed sensor on a Mazda Tribute with automatic transmission is located on the transmission output shaft.
Sensor access
1. Set the vehicle to the parking brake.
2. Raise the front of the car using a jack.
3. Remove the driver’s side wheel.
4. Unscrew the bolts securing the plastic engine protection.
5. Remove the plastic engine protection.
Disconnecting the speed sensor
1. Locate the speed sensor on the transmission output shaft.
2. Disconnect the electrical connector from the speed sensor.
3. Remove the speed sensor mounting bolt.
4. Remove the speed sensor from the transmission output shaft.
Installing a new speed sensor
1. Apply sealant to the threads of the new speed sensor.
2. Screw the new speed sensor into the transmission output shaft.
3. Tighten the speed sensor mounting bolt.
4. Connect the electrical connector to the speed sensor.
5. Reinstall the plastic engine protection.
6. Tighten the bolts securing the plastic engine protection.
7. Reinstall the wheel.
8. Lower the car from the jack.