Location of the automatic transmission control unit in the Opel Antara:
1. Open the hood and find the automatic transmission housing.
– It is located in the front of the car under the engine and is shaped like a bell.
2. Locate the electrical connector.
– It is located in the upper part of the automatic transmission housing, usually next to the gearshift cable.
3. Disconnect the electrical connector.
– Press the connector latches and disconnect it from the control unit.
4. Unscrew the control unit mounting bolts.
– Usually these are two or three bolts that hold the control unit to the automatic transmission housing.
5. Remove the automatic transmission control unit.
– Carefully pull the control unit up and remove it from the automatic transmission housing.
Note:
* The exact location of the automatic transmission control unit may vary slightly depending on the year of manufacture and modification of the Opel Antara.
* It is recommended that you consult the repair manual for your specific vehicle model before performing any work.
* Replacement of the automatic transmission control unit must be performed by a qualified mechanic.