The procedure for properly starting a car with automatic transmission
Step 1: Buckle up
Always fasten your seat belt before starting your vehicle.
Step 2: Make sure the gear selector is in Park (P)
The gear selector must be in park for the brake pedal to operate.
Step 3: Press the brake pedal
Press the brake pedal firmly all the way.
Step 4: Insert the key into the ignition
Insert the ignition key into the lock and turn it to the “ON” position.
Step 5: Start the engine
Turn the ignition key to the “START” position and hold it until the engine starts.
Step 6: Release the ignition key
Once the engine starts, release the ignition key.
Step 7: Wait a few seconds
Let the engine idle for a few seconds before changing gear.
Step 8: Shift into the desired gear
After the engine is idling, carefully shift the gear selector to the desired gear.
Step 9: Release the brake pedal
Slowly release the brake pedal to allow the vehicle to move.
Adviсe:
* Never start the car with the gear selector engaged.
* Keep your foot on the brake pedal while the engine is running to prevent it from moving forward or backward.
* If the engine does not start, check that the brake is applied correctly and the gear selector is in the park position.
*If the engine still does not start after several attempts, consult a mechanic for help.